Equivalents Glokore Knee Massager – Should You Try This

You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
M Glokore Knee Massager Laptop Bios Working Files 0
N Equivalents Glokore Knee Massager - Is It Safe To Use Laptop Repair & Bios Tools 0
Similar threads
Glokore Knee Massager
Equivalents Glokore Knee Massager - Is It Safe To Use

Laptop repair Latest videos

Latest threads

Glokore Knee Massager – Should You Try This

Glokore Knee Massager

Glokore Knee Massager - Is It Safe To Use

jkhhkhk

VitalHemp

Wuffy Robot Dog Interactive Companion: The Future of Robotic Pets

Why the Wuffy Robot Dog Is Trending
The Wuffy Robot Dog has gained attention through social media platforms, technology blogs, and online product reviews. Videos showing the robot dog walking, barking, and responding to touch often attract thousands of views.
Its combination of adorable design and interactive technology makes it a product that people enjoy sharing online.

DermaFixNailFungusGel

Vital Hemp Canada

Dell Latitude 3310 19717-1 CYPD5126-40LQXIT U7201 type-c controller firmware

Dell Latitude 3310 19717-1
CYPD5126-40LQXIT
U7201
Type-c controller firmware

Lenovo Thinkpad daoli5mb6io

Hi everyone, i need this schematic: Lenovo Thinkpad daoli5mb6io
thanks.

DELL 7010 9010

БИОС DELL 7010 9010

HP Pro 3500

BIOS HP Pro 3500

CYPD OFFLINE ADAPTER FOR TYPE-C CONTROLLER PROGRAMMING SUPPORT SVOD,PSOC MiniProg SWD JTAG

CYPD OFFLINE ADAPTER FOR TYPE-C CONTROLLER PROGRAMMING SUPPORT SVOD,PSOC MiniProg SWD JTAG
SUPPORT ALL TYPE-C CONTROLLER
CYPD5126,CYPD4126,CYPD4125,CYPD4226,
CYPD5137,CYPD4225,CYPD6228,CYPD4136,
CYPD6128,CYPD6127,CYPD6227,CYPD4126,
CYPD5225,CYPD4236








Link for the cypd adapter

Dell vostro 15

15341-1 dell laptop schematics & board viwe

Lenovo G50-30 ACLU9 ACLU0 NM-A311 REV 1.0 BoardView File.TVW

Hello, I need Boardview on Lenovo G50-30 ACLU9/ACLU0 NM-A311 REV 1.0 BoardView File.TVW
Thanks

PMBUS PROGRAMMER [IOR] IR DUAL MODE ONLINE/OFFILINE SUPPORT OFFLINE ADAPTER For Graphics Cards,pc motherboard,laptop GPU Infineon




  • PMBUS IOR/IR/XDP/CHL/ASP PROGRAMMER
    Features:
    Support Online/Offline mode     ( connect to motherboard directly , or in some cases we need to solder the ic on the offiline adapter )
    All Requirements Support
    3V,1.8V,SCL,SDA
    EN/PE,IREF,IREF2,PGOOD,SALRT
    ESD Protections , Indicators
    Read & Write program
    Monitor functions online and offline
    Change parameters
    Support backup one chip or all systems ( multi chip together )
    PMBUS PROGRAMMER CHIP SUPPORT LIST:
    • SUPPORT
      IR35201,IR35203,IR35204,IR35217,IRPS5401,IR38263
      IR38265,IR38163,IR38164,IR38363,IR38165,IR38365
      IR38060,IR38062,IR.8063,IR38064,IR3590,IR3595
      IR3588,IR3596,IR36021,IR3563B,IR3564B,IR3565B
      IR3567B,IR3570B,IR3585B,IR35211,IR35218,IR3580
      IR3581,IR3584,IR3591,XDPE11280A,IR35207,IR35209
      IR25210,IR35212,IR35215 , MORE
      OFFLINE ADAPTER IR35201,IR3580,XDPE132G5D,IR3595,IR3567,ASP1300,IR3563,IR35217,IR3570,CHL8228,ASP1251,CHL8325,IR3541,IR3564,IR35204
    IOR READ,WRITE & Modify REGISTER Program :



  • According to the schematic, pin 24 is SDA and pin 25 is SCL in the PMBus section.
    Solder SDA, SCL, and GND, then connect the programmer to your computer and power on the device.
    If you’re using an offline adapter, first solder the chip, then connect the adapter to the programmer before connecting the programmer to your computer.
    Software Setup
    Open IR PowIRCenter or XDPDesigner, depending on the chip type.
    When the programmer connects successfully, the status indicator in the lower-left corner will turn green.
    Click the Auto Populate Devices icon (first icon on the left).
    All connected chips will be displayed under Total Pout (e.g., IR35217, IR3580 if both are connected).
    Select the desired chip from the list to display its register map, where you can view and modify parameters.
    Backing Up the Program
    To back up the current program, click Save Config File.
    If a user password prompt appears, simply ignore it and click Continue.
    The file will be saved in .txt format, which you can use later.
    Alternatively, you can save the entire board data by clicking File > Save Board Design, which generates a PCB data file.
    Writing a Program
    To write a configuration, click Load Config File and select the desired .txt file.
    Then click Write All Reg to program the chip.
    Utilities & Diagnostics
    The software also offers several utilities under the Utilities menu.
    For example, selecting SalemDevice will display a counter showing how many times the chip has been programmed (some chips have a write limit).
    Clicking Check MTP will reveal additional memory/programming details.
    Selecting Device Status will display a phase fault report to help diagnose potential hardware damage.





























    LINK OF THE PROGRAMMER : ALEXSOF
Top