ZUS HDD USB-SATA Wiring PCB Pro.VER2.1 Flying Line Jump Wire

[Admin]

The ZUS HDD USB-SATA Wiring PCB Pro VER2.1 Flying Line Jump Wire . is a special circuit board (ADAPTER) to help people who recover data from computers. It makes it easier for them to change the way a hard drive connects from USB to SATA, which can be useful for data recovery .

Why should you use ZUS HDD USB-SATA Wiring PCB Pro VER2.1?

1. For New WD USB Hard Drives: Some new WD USB hard drives made since 2019 can't be easily fixed with regular tools. People have to manually connect wires to make the hard drive work better. The HDD USB-SATA Wiring PCB Pro. makes this process faster and simpler. You just need to solder the provided wires to the right places on the USB circuit board. After you buy it, you'll get instructions with pictures to help you.
2. Works with Different Brands: This adapter board isn't just for WD hard drives. It can also help with Toshiba and Samsung hard drives ,, etc when they have problems like weak parts or lots of bad areas. Using SATA instead of USB often makes the data transfer more stable and faster.

Also, the HDD USB-SATA Wiring PCB Pro. uses special lines to make sure the signals between the USB and SATA are stable and won't be affected by high temperatures.

Important things to know:

1. Soldering Skills: If you're not good at soldering (connecting things with melted metal), it's better not to buy this circuit board.
2. Check Your USB Circuit Board: The original USB circuit board on your hard drive must be in good shape, especially the main chip and ROM chip. If they're not working well, the new circuit board won't help.

GIT IT FROM HERE https://alexsof.com/shop-2/

 

[Admin]

The New Version 3.1 2024
ZUS USB - SATA Adapter SSD USB-C Flying WIRE DATA RECOVERY V3.1 2024